Finalscope is reader-supported. As an affiliates we earn from qualifying purchases.

How to Use Slime Tire Inflator? [4 Tested Methods]

Are you facing troubles while inflating your car tire? If the Slime Tire Inflator stopped working all of a sudden. There could be a dozen technical problems with your device, even if it was working fine yesterday. But don’t worry too much. There is always a fix for your Slime Tire Inflator, which you can try out instantly and get back working again. But if you do not have an expert’s advice, there’s nothing to worry about either. Follow this guide.

How to Use Slime Tire Inflator?

How to Use Slime Tire Inflator

Step 1: You can start by connecting the power socket to the lightning port of your vehicle. You can now connect the input end to the tire inflator.

Step 2: Now place the tire inflator next to the tire on which you will need to inflate.

Step 3: The next step is to prepare the nozzle for inflating the tire. Fix the nozzle to the tire and ensure that it sits firm and there is not much movement.

Step 4: Once you are done with this, you can now turn on the tire inflator. Go to the settings and adjust the input pressure according to the tire that you need.

Step 5: You can now start to inflate the tire without any delay. Gradually the inflator will start to work and wait till it finishes. Now unscrew the nozzle and turn it off.

Slime Tire Inflator not Working

The Slime tire inflator generally works well and without any disturbances. Still, if you are facing problems, there are multiple ways to overcome this as well.

Solution 1: Power Socket

  1. The first thing that you need to do is to check the available power socket. It usually gets connected to the 12V light switch in your car.
  2. If the tire inflator is not working properly, it is time to recheck the lightning port. You can test it once with the help of any charger socket and then ensure it is working.
  3. If this still does not work for you, try to place the slime tire inflator in a different socket as well.


Solution 2: Check the Batteries

  1. The tire inflators won’t work properly if the charging mechanism is not currently working. It is important to check the batteries as well.
  2. It would help if you made sure that the batteries for this tire inflator are working properly.
  3. In case of emergencies, it is better to have a new pair of batteries for your tire inflator. You can use them to get the device fixed properly.

Solution 3: Checking the Nozzles

  1. Another important thing to look for is the nozzle of the device. You need to ensure that you have clipped the nozzle properly.
  2. Fix it with the tire and make small movements to ensure that there is n gap between the nozzle and the tire. A gap will result in a leak, and your tire will not inflate.
  3. If you find that the nozzle is clipped tightly, it is important to remove it once and then again affix it to find the best result.

Solution 4: Calibrate the Inflator

  1. New inflators do not have any technical problems, but it is important to get them checked.
  2. You can bring it up to the respective store and get it checked by a technician to get the best results. You can also contact the support department for immediate results.

Slime Rugged Digital Tire Inflator Troubleshooting

  1. The first thing that you need to do is to check the tire pressure set point. Look for the digital gauge if it is set to a lower PSI. It should be around 20 psi at minimum.
  2. The next thing you need to do is to check the power plug. Try to push it firmly so that it does not come out while you are moving.
  3. It would help if you went through the receptacle and plug terminals. Check for any dirt on the nozzle. If you find any, clean them immediately for a better result.
  4. The next thing to do is to check the vehicle power outlet. This should be a minimum of 15 amperes. You must ensure that it matches the product.
  5. Overheating may become a common problem for any tire inflator. If this happens, you must keep the product in a cool place for atleast half-hour.
  6. If the voltage is too low, the vehicle battery could be damaged. Go through it once and make sure that the battery is working properly.

Slime sport digital tire gauge battery replacement.

Final Talk

How to use slime tire inflator is not a cocern anymore, The Slime Tire Inflator comes with decent performance to inflate the tire. However, it is important to go through the device carefully and figure out where the problem lies if you are facing this problem. Without a proper diagnosis, you won’t be able to fix this as well. These tips mentioned above will surely help you to get it fixed instantly.

Leave a Comment