How To Remove Old Window Tinting [Including Glue]

A window-tinting is alternatively used as a sun reflector to keep your car cool and make it look a bit premium. But of course, you may not want to carry with the same old window tinting. Either they may be too old and dirty, or you may not like the color.

Irrespective of what your reason is, removing window tint is not a difficult task at all. However, to do this, you may require specific accessories and appliances.

Here is a quick DIY guide on Removing Old Window tinting, which you can use easily.

How to Remove Old Window Tinting?

Step 1: Prepare Yourself

Removal of window tinting will take a bit of time. This is why it is important to prepare everything. Make a note of the things that you will need, and then you can go forward. As an essential, try to get dish soap with a bucket and some paper towels.

To peel off the tint, you may also require a sharp knife. Make a solution with the dish soap and the water and soak it a bit with newspaper. You may also require an adhesive remover if it is too tight.

Step 2: Prepare the Window

Only preparing yourself will not be enough, and you will have to prepare the window as well. You won’t pull off the tinting if there is vinyl or decals on the window. You will have to remove them first.

In this case, you will have to work from the interior of your window. You can run the knife and peel off the vinyl to go forward with the window tinting. You can also apply a bit of heat if it is not coming off the window.

Step 3: Execution is Key

Now it is time for you actually to remove the old window tinting. You can start this up why applying the soap solution all over the windows. Make it completely wet, and then place the newspapers over there.

You can now start scribbling on the window panes to remove the tinting. This will steadily bring out the film, and you can peel it off. The entire tint may not come out after the first try. You will have to repeat this peeling process.

Step 4: Removing the Remaining Parts

Once you have finished peeling out the big films, it is now time to get rid of the small parts. For this, you can take the help of a heat blower.

Apply continuous heat on areas where the remaining parts are present. You can also take a ball of steel wool if some parts are being too adhesive.

But before this, make sure that you have applied at least some adhesive remover to get forward with the procedure.

Step 5: Apply Glass Cleaners

Once the tint is removed, your job is not finished. It is now time to take care of your window. You can do this easily with the help of a glass cleaner.

Take soft foam and apply glass cleaner on the entire window. You can now rub off the tint and the remaining parts of the tint easily with this cleaner.

It should not take much time. Repeat the process if there are still some small parts of the window tinting present.

Note: Permitting tinting to get old and begin to bubble or stain on a vehicle can invalidate the point of having it and even make the vehicle risky to drive.

Fortunately, figuring out how to remove a window tint is basic and requires essential supplies. It just requires a couple of hours, and afterward, the vehicle will be prepared for a new tint.

The Razor Blade and Heat Gun Technique

First, take the heat gun and get the film heated up on the two sides of the glass while recollecting not consuming the subject vehicle’s moldings and entryway board. After the glass and tint have gotten hot to the touch, take your razor scrubber with treated steel sharp edges and start in a top corner of the window and tenderly reason the tint to strip.

How To Remove Window Tint Glue

After you get the strip going with your fingers, start to pull the tint down uniformly across the window while keeping the heat gun moving around. After the tint has been pulled off, essentially shower the leftover glue with an answer of water and child cleanser and start the scratching cycle!

The Steamer and Razor Blade Technique

This procedure is the quickest, but it requires an interest in a liner arranged for this kind of work. Steaming the tint warms up the material, helping the window tint cement remove itself with the tint.

By and large, the liner won’t hurt the vehicle, but it can make you consume your hands along these lines. Be careful. When you move the tint beginning to pull away, continue steaming and pulling until the tint is removed.

At that point, steam and scratch all areas in the window tint measure that are left finished.  


If you are considering re-applying a new window tinting for your car and worried about how to remove old window tinting, you need to make sure that it does not have any moisture content on the window, if possible, to blow once more on the window to make sure that it is scorched.

Unless it is a dry surface, the new tinting will not stick properly. Make sure that you go very slowly while completing the window tinting procedure.

Do let us know if you are facing any difficulties with window tinting. tries to give you one platform that saves your time in today’s hectic schedule and also puts an extra effort to make your decision better, wiser and, economical whenever you spend even a single penny over the internet.

Contact us: [email protected]